Clifton stirred analogue water baths are designed for immersion of flasks, bottles and racks in a stable temperature environment.
The stainless steel tank is contained within a sturdy outer case and supplied complete with a stainless steel shelf, which provides good water circulation and temperature stability.
£845.92 exc. VAT
Clifton stirred water baths are designed for immersion of flasks, bottles and racks in an accurate temperature environment throughout the water bath.
3 Year Warranty
Before leaving the factory, every water bath is identified with a unique serial number and undergoes a factory calibration, adjusting the control to a known traceable value. Each is electrically tested for safety during the final inspection, and a test certificate is enclosed in the rear of the instruction book.
Broad range of accessories available to suit wide range of applications.
Painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments.
Energy Consumption
0.5kWh @ 37°C
0.4kWh @ 60°C – lid fitted
(Based on NE4-8T)
Please note that energy consumption may vary due to factors such as location, ventilation, ambient temperatures and loading.
Controls
Each water bath features a bold LED display of measured temperatures in real-time and in increments of ±0.1°C, using a precision PID temperature controller. Option to set for water temperature only or a combination of temperature and time. Timer setting variable in 1-minute increments from 00:01 to 99:59 (hh:mm). Time and temperature settings are retained in the memory, even after the unit has been turned off. Every bath undergoes a factory calibration at 37°C and 85°C for validation.
Heating/Cooling Information
An accessory immersion cooler DC1-300 is used to cool the water bath. Where bath temperatures are below ambient, we recommend a mix of glycol and water. We also recommend a lid or layer of spheres for insulation. The water bath should be used in ambient temperature (20°C). For water temperatures above 60°C we recommend that an accessory lid or layer of spheres be used for optimum performance. This will reduce evaporation and a lid will keep the samples and water free from contamination. Optimum performance saves energy by reducing electricity consumption and running costs.
 |  |  |  | |||
|---|---|---|---|---|---|---|
| Product Code | NE4-8T | NE4-14T | NE4-22T | NE4-28T | ||
| Chamber Capacity | 8 Litres | 14 Litres | 22 Litres | 28 Litres | ||
| Temperature Range | Ambient + 5°C – 99°C | |||||
| Temperature Control | Analogue dial pointer graduated in 5°C divisions | |||||
| Sensitivity | ±0.2°C | |||||
| Uniformity | ±0.05°C | |||||
| Heater Power (220-240V) | 1250W | |||||
| Voltage | 230V models available 50-60Hz | |||||
| Drain Outlet | ❌ | ✅ | ||||
| Dimensions | ||||||
| External (mm) | 271w x 332d x 170h | 361w x 332d x 170h | 537w x 332d x 170h | 537w x 332d x 290h | ||
| Internal (mm) | 129w x 300d x 150h | 219w x 298d x 150h | 395w x 298d x 150h | 395w x 298d x 150h | ||
| Water Level Max. (mm) | 130 | 180 | ||||
| Max Depth Above False Base (mm) | 95 | 145 | ||||
| Manufacturer |
|---|
Fill in the form and our team of experts will recommend the best viscometer and setup based on your requirements.
