Compact water purification system, developed for routine pure water laboratory tasks
The Analyst is a compact water purification system, using integrated carbon pre-treatment, reverse osmosis and deionisation technologies to produce a flow of water purified to at least 1MΩ.cm. An internal 20l storage tank is standard, with options including external tanks, wi-fi connectivity, remote monitoring and control panels with colour touchscreen, plus ECO versions that allow up to 50% of the waste water stream to be recovered
For clinical laboratory water – Type II / Deionised (DI) water
Price range: £3,698.88 through £4,547.93 exc. VAT
Sustainable water purification systems for laboratories
We responded to increasing laboratory interest in sustainable
solutions by the introduction of ECO options for our most
popular Purite water purification systems. The ECO option is
available exclusively on our 160 models.
ECO option now available offering 50% recovery which equates to a significant reduction in water usage and waste
There is a choice of storage tank for your application, available to store the purified water externally to the unit. Level switches ensure the tank does not overflow and refills when low.
The range include two models that offer either:
As well as storage tanks we can supply on-demand
pumps to provide a pressurised feed from the tanks.
| Unit specification | 160 | 320 |
|---|---|---|
| Width (mm) | 440 | 440 |
| Depth (mm) | 560 | 560 |
| Height (mm) | 750 | 750 |
| Maximum Shipping Weight (kg)* | 36 | 52 |
| Maximum Working Weight (kg)* | 41 | 59 |
| Installation requirements | 160 | 320 |
|---|---|---|
| Power | Single Phase, 110-230V, +/- 10%, 50/60 Hz | Single Phase, 110-230V, +/- 10%, 50/60 Hz |
| Feed Water | Potable | Potable |
| Maximum TDS (ppm) | 1000 | 1000 |
| Minimum inlet pressure – psi (bar) | 10 (0.5) | 10 (0.5) |
| Maximum inlet pressure – psi (bar) | 30 (2) | 30 (2) |
| Feed water temperature | 1-35oC | 1-35oC |
| Product outputs @ 10ºC (l/hr)* | 14.4 | 30 |
| Product outputs @ 25ºC (l/hr)* | 24 | 48 |
*Outputs based on a feed water pressure of 4 bar
| System specification | Analyst |
|---|---|
| Pure water storage | 20 litre storage tank as standard (External 50 & 100 litre tanks available) |
| Display panel | LCD – Colour touch screen |
| Pre-treatment cartridge | Yes |
| Reverse osmosis | Yes |
| Deionisation cartridge | Yes |
| Treated water specification | Analyst |
|---|---|
| Inorganics | > 1MΩ.cm |
| pH1 | Neutral |
| Bacteria | > 99% rejection2 |
| Organics – TOC (ppb) | < 50 |
| Dispense modes | Bib tap on storage tank |
1pH of stored water may decrease due to absorption of free carbon dioxide
2When measured directly across the membrane
Fill in the form and our team of experts will recommend the best viscometer and setup based on your requirements.
